Citation: | ZHANG Zelin, ZHOU Hongming, FENG Ming, ZHANG Xianglei, CHEN Zhuojie. Process parameters optimization of zirconia ceramics polishing with magnetic compound fluid slurry[J]. Diamond & Abrasives Engineering, 2023, 43(6): 712-719. doi: 10.13394/j.cnki.jgszz.2023.0003 |
[1] |
ZHANG X, WU X, SHI J. Additive manufacturing of zirconia ceramics: A state-of-the-art review [J]. Journal of Materials Research and Technology,2020,9(4):9029-9048. doi: 10.1016/j.jmrt.2020.05.131
|
[2] |
OLHERO S M, TORRES P, MESQUITA-GUIMARAES J, et al. Conventional versus additive manufacturing in the structural performance of dense alumina-zirconia ceramics: 20 years of research, challenges and future perspectives [J]. Journal of Manufacturing Processes,2022,77:838-879. doi: 10.1016/j.jmapro.2022.02.041
|
[3] |
曾尽娣, 宋晶晶, 张宇航, 等. 不同抛光处理全氧化锆修复体的表面粗糙度和细菌黏附 [J]. 中国组织工程研究,2023,27(21):3320-3324. doi: 10.12307/2023.174
ZENG Jindi, SONG Jingjing, ZHANG Yuhang, et al. Surface roughness and bacteria adhesion of full zirconia restoration after different polishing treatment [J]. Chinese Journal of Tissue Engineering Research,2023,27(21):3320-3324. doi: 10.12307/2023.174
|
[4] |
KLINGE B, MEYLE J. Soft-tissue integration of implants: Consensus report of working group 2 [J]. Clinical Oral Implants Research,2010,17(S2):93-96.
|
[5] |
LI M, LYU B, YUAN J, et al. Evolution and equivalent control law of surface roughness in shear-thickening polishing [J]. International Journal of Machine Tools and Manufacture,2016,108:113-126. doi: 10.1016/j.ijmachtools.2016.06.007
|
[6] |
LIU W, TANG D, GU H, et al. Experimental study on the mechanism of strain rate on grinding damage of zirconia ceramics [J]. Ceramics International,2022,48(15):21648-21655. doi: 10.1016/j.ceramint.2022.04.142
|
[7] |
ZHANG G, WANG Z, CHEN W, et al. Single-point grinding of alumina and zirconia ceramics under two-dimensional compressive prestress [J]. International Journal of Precision Engineering and Manufacturing,2020,21:1-9. doi: 10.1007/s12541-019-00232-8
|
[8] |
KIZAKI T, SUGITA N, MITSUISHI M, et al. Experimental analysis of the machinability in the thermally assisted milling process of zirconia ceramics [J]. Precision Engineering,2016,45(1):176-186.
|
[9] |
孙纪奎, 梅子彧, 楼雨欣, 等. 三维打印和切削氧化锆修复体的成型性能研究进展 [J]. 口腔颌面修复学杂志,2022,23(1):63-69.
SUN Jikui, MEI Ziyu, LOU Yuxin, et al. Research progress of three-dimensional printing and cutting zirconia restorations [J]. Chinese Journal of Prosthodontics,2022,23(1):63-69.
|
[10] |
ZUCUNI C P, GUILARDI L F, RIPPE M P, et al. Fatigue strength of yttria-stabilized zirconia polycrystals: Effects of grinding, polishing, glazing, and heat treatment [J]. Journal of the Mechanical Behavior of Biomedical Materials,2017,75:512-520. doi: 10.1016/j.jmbbm.2017.06.016
|
[11] |
CARAVACA C F, FLAMANT Q, ANGLADA M, et al. Impact of sandblasting on the mechanical properties and aging resistance of alumina and zirconia based ceramics [J]. Journal of the European Ceramic Society,2018,38(3):915-925.
|
[12] |
SEO S H, KIM J E, NAM N E, et al. Effect of air abrasion, acid etching, and aging on the shear bond strength with resin cement to 3Y-TZP zirconia [J]. Journal of the Mechanical Behavior of Biomedical Materials,2022,134:105348. doi: 10.1016/j.jmbbm.2022.105348
|
[13] |
MAY M M, FRAGA S, MAY L G. Effect of milling, fitting adjustments, and hydrofluoric acid etching on the strength and roughness of CAD-CAM glass- ceramics: A systematic review and meta-analysis [J]. The Journal of Prosthetic Dentistry,2022,128(6):1190-1200. doi: 10.1016/j.prosdent.2021.02.031
|
[14] |
PINTO P, CARVALHO A, SILVA F S, et al. Comparative toothbrush abrasion resistance and surface analysis of different dental restorative materials [J]. Tribology International,2022,175:107799. doi: 10.1016/j.triboint.2022.107799
|
[15] |
XU L, LEI H, DING Z, et al. Preparation of the rod-shaped SiO2@C abrasive and effects of its microstructure on the polishing of zirconia ceramics [J]. Powder Technology,2022,395:338-347. doi: 10.1016/j.powtec.2021.09.070
|
[16] |
XU L, PARK K, LEI H. Polishing of zirconia ceramics by chemically-induced micro-nano bubbles [J]. Ceramics International,2022,12:48.
|
[17] |
MING Y, HUANG X, ZHOU D, et al. A novel Non-Newtonian fluid polishing technique for zirconia ceramics based on the weak magnetorheological strengthening thickening effect [J]. Ceramics International,2022,48(5):7192-7203. doi: 10.1016/j.ceramint.2021.11.280
|
[18] |
SUN Z, TIAN Y, FAN Z, et al, Experimental investigations on enhanced alternating-magnetic field-assisted finishing of stereolithographic 3D printing zirconia ceramics [J]. Ceramics International, 2022, 48(24): 36609-36619.
|
[19] |
SHIMADA K, WU Y, MATSUO Y, et al. Float polishing technique using new tool consisting of micro magnetic clusters [J]. Journal of Material Processing Technology,2005,162:690-695.
|
[20] |
WANG Y, WU Y, Nomura M. Fundamental investigation on nano-precision surface finishing of electroless Ni–P-plated STAVAX steel using magnetic compound fluid slurry [J]. Precision Engineering,2017,48:32-44. doi: 10.1016/j.precisioneng.2016.11.003
|
[21] |
FENG M, WU Y, WANG Y, et al. Investigation on the polishing of aspheric surfaces with a doughnut-shaped magnetic compound fluid (MCF) tool using an industrial robot [J]. Precision Engineering,2020,61:182-193. doi: 10.1016/j.precisioneng.2019.09.018
|
[22] |
FENG M, WANG Y, WU Y. Investigation on polishing of zirconia ceramics using magnetic compound fluid: Relationship between material removal and surface roughness [J]. International Journal of Automation Technology,2021(1):15.
|