Contrastive study on diamond wire saw cutting with/without ultrasonic vibration

ZHANG Liaoyuan; ZHAO Yan; MA Kangle; SHANG Mingwei

doi:10.13394/j.cnki.jgszz.2016.2.0008

Volume 36 Issue 2

Apr. 2016

Turn off MathJax

Article Contents

Article Navigation > Diamond & Abrasives Engineering > 2016 > 36(2): 32-36

ZHANG Liaoyuan, ZHAO Yan, MA Kangle, SHANG Mingwei. Contrastive study on diamond wire saw cutting with/without ultrasonic vibration[J]. Diamond & Abrasives Engineering, 2016, 36(2): 32-36. doi: 10.13394/j.cnki.jgszz.2016.2.0008

Citation:

ZHANG Liaoyuan, ZHAO Yan, MA Kangle, SHANG Mingwei. Contrastive study on diamond wire saw cutting with/without ultrasonic vibration[J]. Diamond & Abrasives Engineering, 2016, 36(2): 32-36. doi: 10.13394/j.cnki.jgszz.2016.2.0008

Citation:

PDF( 2336 KB)

Contrastive study on diamond wire saw cutting with/without ultrasonic vibration

doi: 10.13394/j.cnki.jgszz.2016.2.0008

College of Mechanical Engineering, Shenyang University of Science and Technology, Shenyang 110159, China

More Information

Rev Recd Date: 2016-01-08

Available Online: 2022-07-27

Abstract

Abstract

On the basis of a large number of literatures summarized,processing experiment is carried out using diamond wire saw to cut workpieces with/without ultrasonic vibration.The results show that with the increase of linear velocity,sawing force becomes smaller and that with the increase of feed speed sawing force becomes bigger.Compared with sole diamond wire saw cutting,ultrasonic diamond wire saw machining's sawing force is smaller and its straightness of process track is better,with smaller surface roughness value and better surface quality.
- diamond wire saw,
- ultrasonic machining,
- carbon fiber composite material