CN 41-1243/TG ISSN 1006-852X
Volume 44 Issue 2
Apr.  2024
Turn off MathJax
Article Contents
SUN Yuhu, ZHANG Jinsheng, ZHANG Heng, WANG Kaida, GUO Anshun, NIU Pingping. Effect of corrosion on sawing stability of diamond circular saw blade[J]. Diamond & Abrasives Engineering, 2024, 44(2): 259-266. doi: 10.13394/j.cnki.jgszz.2023.0115
Citation: SUN Yuhu, ZHANG Jinsheng, ZHANG Heng, WANG Kaida, GUO Anshun, NIU Pingping. Effect of corrosion on sawing stability of diamond circular saw blade[J]. Diamond & Abrasives Engineering, 2024, 44(2): 259-266. doi: 10.13394/j.cnki.jgszz.2023.0115

Effect of corrosion on sawing stability of diamond circular saw blade

doi: 10.13394/j.cnki.jgszz.2023.0115
More Information
  • Received Date: 2023-05-18
  • Accepted Date: 2023-07-18
  • Rev Recd Date: 2023-06-29
  • Available Online: 2023-11-06
  • When the rusted diamond circular saw blade works, there will be some problems such as reduced sawing stability. In response to this phenomenon, models are established through the structural parameters of saw blades with different corrosion degrees, and modal analysis of saw blades with different corrosion degrees is carried out. This analysis takes sawing vibration as a reference index of stability and studies the influence of saw blade corrosion on stability. Experiments verify the accuracy of the results. The results show that the vibration modes of the corroded saw blade more are more than 6 orders different from those of the original saw blade, and the difference in adjacent natural frequencies reduces by 8.56 % in the frequency range of 640 to 1,280 Hz. With the increase of corrosion degree, the saw blade is more prone to resonance. Corrosion at the important position has a great influence on the sawing stability of the saw blade. Reducing surface defects can reduce corrosion and its influence on the sawing stability of the saw blade. This study provides guidance for the practical use and rust prevention technology of diamond circular saw blades.

     

  • loading
  • [1]
    谢东朋. 花岗石薄型板材高效加工关键技术与锯解设备设计研究[D]. 济南: 山东大学, 2010.

    XIE Dongpeng. Study on high efficiency processing key technology and saw equipment design of granite thin slab[D]. Jinan: Shandong University, 2010.
    [2]
    张玉忠. 圆锯片基体失稳的应力分析 [J]. 金刚石与磨料磨具工程,2012,32(3):69-73.

    ZHANG Yuzhong. Stress analysis for unstability of circular blade core [J]. Diamond & Abrasives Engineering,2012,32(3):69-73.
    [3]
    邸浩, 王经坤, 王凯达, 等. 基于离心刚化效应的圆锯片动态特性研究 [J]. 工具技术,2021,55(9):18-23. doi: 10.3969/j.issn.1000-7008.2021.09.003

    DI Hao, WANG Jingkun, WANG Kaida, et al. Dynamic characteristics analysis of circular saw blade based on centrifugal stiffening effect [J]. Tool Engineering,2021,55(9):18-23. doi: 10.3969/j.issn.1000-7008.2021.09.003
    [4]
    叶鲁浩, 王志, 张进生, 等. 基于ANSYS圆锯片模态分析及谐响应分析 [J]. 金刚石与磨料磨具工程,2015,35(4):41-46.

    YE Luhao, WANG Zhi, ZHANG Jinsheng, et al. Modal analysis and harmonic response analysis on circular saw blade based on ANSYS [J]. Diamond & Abrasives Engineering,2015,35(4):41-46.
    [5]
    FENG W, ZHANG J S, ZHOU H R, et al. Investigation on the vibration characteristics of circular saw blade with different slots[J]. Journal of physics. Conference series, 2020(1633): 012006.
    [6]
    DROBA A, JAVOREK L, SVOREN J, et al. New design of circular saw blade body and its influence on critical rotational speed [J]. Drewno,2015,58(194):147-158. doi: 10.12841/wood.1644-3985.081.12
    [7]
    赵雷, 张德臣, 闫春宝, 等. 金刚石圆锯片行波共振分析及优化 [J]. 金刚石与磨料磨具工程,2022,42(2):240-247.

    ZHAO Lei, ZHANG Dechen, YAN Chunbao, et al. Analysis and optimization of traveling wave resonance of diamond circular saw blade [J]. Diamond & Abrasives Engineering,2022,42(2):240-247.
    [8]
    杨秀鲁. 圆锯片基体的动态特性分析及降噪设计[D]. 济南: 济南大学, 2019.

    YANG Xiulu. Dynamic characteristics and noise reduction design of the base of circular saw blade[D]. Jinan: Jinan University, 2019.
    [9]
    WANG F, SHAN Q, ZHANG F, et al. Pitting corrosion behavior of metal materials and research methods [J]. IOP conference series. Earth and environmental science,2021,651(3):32039. doi: 10.1088/1755-1315/651/3/032039
    [10]
    袁哲, 曹瑞元, 赵民. 金刚石圆锯片模态分析 [J]. 制造业自动化,2013,35(17):147-149.

    YUAN Zhe, CAO Ruiyuan, ZHAO Ming. Model analysis of diamond circular saw blade [J]. Manufacturing Automation,2013,35(17):147-149.
    [11]
    王雪飞, 郭耀杰, 孙云, 等. 随机点蚀对Q460等边角钢抗拉性能的影响 [J]. 科学技术与工程,2021,21(12):4882-4890. doi: 10.3969/j.issn.1671-1815.2021.12.019

    WANG Xuefei, GUO Yaojie, SUN Yun, et al. Effect of random pitting corrosion on the tensile properties of Q460 equilateral angle steel [J]. Science Technology and Engineering,2021,21(12):4882-4890. doi: 10.3969/j.issn.1671-1815.2021.12.019
    [12]
    姚涛. 开槽圆锯片减振降噪机理研究[D]. 天津: 河北工业大学, 2009.

    YAO Tao. Mechanism study on vibration and noise reduction of circular saw with slot[D]. Tianjin: Hebei University of Technology, 2009.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(13)  / Tables(8)

    Article Metrics

    Article views (356) PDF downloads(22) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return