CN 41-1243/TG ISSN 1006-852X
CN
Advanced Search+
Volume 43 Issue 5
Oct.  2023
Turn off MathJax
Article Contents
Article Navigation >  Diamond & Abrasives Engineering  > 2023  >  43(5): 546-552
CAI Jianing, LE Chen, FAN Zimin, LI Xin, TANG Mingqiang, ZHAO Fang. Influence of hot-pressed sintering temperature on properties of SiCp/Al composites[J]. Diamond & Abrasives Engineering, 2023, 43(5): 546-552. doi: 10.13394/j.cnki.jgszz.2022.0105
Citation: CAI Jianing, LE Chen, FAN Zimin, LI Xin, TANG Mingqiang, ZHAO Fang. Influence of hot-pressed sintering temperature on properties of SiCp/Al composites[J]. Diamond & Abrasives Engineering, 2023, 43(5): 546-552. doi: 10.13394/j.cnki.jgszz.2022.0105
shu

Influence of hot-pressed sintering temperature on properties of SiCp/Al composites

doi: 10.13394/j.cnki.jgszz.2022.0105
  • 1.

    College of Materials Science and Engineering, Xi’an University of Science and Technology, Xi’an 710000, China

  • 2.

    TIZ Advanced Alloy Technology Co., Ltd., Quanzhou 362000, Fujian, China

More Information
  • Received Date: 2022-07-04
  • Accepted Date: 2023-05-31
  • Rev Recd Date: 2022-09-29
    • Available Online: 2023-12-07
    Abstract
  • SiCp/Al composites were prepared by hot-pressing sintering method, and the effect of sintering temperature on the properties of the composites was studied. The phase compositions, relative density, mechanical properties and micro morphology of the composite samples were analyzed through X-ray diffraction, Archimedes drainage method, the three-point bending method and scanning electron microscope. Additionally, the thermal conductivity and thermal expansion coefficient were measured. The results show that SiCp/Al composites are composed of SiC, Al and Mg2Si phases. The addition of Mg improves the wettability between the matrix and SiC particles. With the increase of sintering temperature, the hardness and bending strength of the composites first increase and then decrease, reaching the maximum values of 98 HRB and 275 MPa at 700 ℃, respectively. The thermal conductivity of the composites first increases and then decreases, and the thermal expansion coefficient first decreases and then increases, reaching the maximum value of 218.187 W/(m·K) and the minimum value of 8.6 × 10−6 K−1 at 700 ℃, respectively.

     

    • FullText(HTML)
  • loading
    • References(31)
  • [1]
    董翠鸽, 王日初, 彭超群, 等. SiCp/Al复合材料研究进展 [J]. 中国有色金属学报,2021,11:3161-3181. doi: 10.11817/j.ysxb.1004.0609.2021-42310

    DONG Cuige, WANG Richu, PENG Chaoqun, et al. Research progress in SiCp/Al composites [J]. The Chinses Journal of Nonferrous Metals,2021,11:3161-3181. doi: 10.11817/j.ysxb.1004.0609.2021-42310
    [2]
    LEE H, SOHN S S, JEON C, et al. Dynamic compressive deformation behavior of SiC-particulate-reinforced A356 Al alloy matrix composites fabricated by liquid pressing process [J]. Materials Science & Engineering,2017,680(5):368-377.
    [3]
    刘春轩, 罗任, 谢屹, 等. 轨道交通制动盘用颗粒增强铝基复合材料研究及进展 [J]. 现代城市轨道交通,2022(7):11-16.

    LIU Chunxuan, LUO Ren, XIE Yi, et al. Research progress on particle reinforced aluminummatrix composites for brake discs in rail transit [J]. Modern Urban Transit,2022(7):11-16.
    [4]
    周岩, 张冬云, 王卫东, 等. 选区激光熔化成形碳化硅颗粒增强铝基复合材料研究现状及航空航天应用 [J]. 航空制造技术,2018,61(10):68-73. doi: 10.16080/j.issn1671-833x.2018.10.068

    ZHOU Yan, ZHANG Dongyun, WANG Weidong, et al. Current situation and aerospace applications analysis based on SiC particle reinforced aluminum matrix composites manufactured by selective laser melting [J]. Aeronautical Manufacturing Technology,2018,61(10):68-73. doi: 10.16080/j.issn1671-833x.2018.10.068
    [5]
    修子扬, 张强, 王子鸣, 等. 电子封装用SiCp/6063复合材料的制备与性能研究 [J]. 精密成形工程,2018,10(1):91-96. doi: 10.3969/j.issn.1674-6457.2018.01.011

    XIU Ziyang, ZHANG Qiang, WANG Ziming, et al. Preparation and properties of SiCp/6063 composites for electronic packaging [J]. Journal of Netshape Forming Engineering,2018,10(1):91-96. doi: 10.3969/j.issn.1674-6457.2018.01.011
    [6]
    刘相权. 高体积分数SiC颗粒增强Al基复合材料的制备和性能研究 [D]. 长沙: 中南大学, 2008.

    LIU Xiangquan. Preparation and performance study of high volume fraction SiC particles enhanced Al matrix composites [D]. Changsha: Central South University, 2008.
    [7]
    崔岩, 李丽富, 李景林, 等. 制备空间光机结构件的高体份SiC/Al复合材料 [J]. 光学精密工程,2007(8):1175-1180. doi: 10.3321/j.issn:1004-924x.2007.08.004

    CUI Yan, LI Lifu, LI Jinglin, et al. High volume fraction SiC/Al composites for space-based optomechanical structures [J]. Optics and Precision Engineering,2007(8):1175-1180. doi: 10.3321/j.issn:1004-924x.2007.08.004
    [8]
    王丽雪, 曹丽云, 刘海鸥. 铝基复合材料研究的进展 [J]. 轻合金加工技术,2005(8):10-12, 52. doi: 10.3969/j.issn.1007-7235.2005.08.003

    WANG Lixue, CAO Liyun, LIU Haiou. Progress of aluminium matrix composites [J]. Light Alloy Fabrication Technology,2005(8):10-12, 52. doi: 10.3969/j.issn.1007-7235.2005.08.003
    [9]
    张国政, 吕栋腾, 吴治明. 碳化硅颗粒增强铝基复合材料的制备及应用的研究 [J]. 新技术新工艺,2010(11):60-62. doi: 10.3969/j.issn.1003-5311.2010.11.022

    ZHANG Guozheng, LYU Dongteng, WU Zhiming. Research of fabrication and application for SiCp particle reinforced aluminum matrix composites [J]. New Technology & New Process,2010(11):60-62. doi: 10.3969/j.issn.1003-5311.2010.11.022
    [10]
    齐云国. SiCp/Al复合材料制备及其组织与力学性能研究 [D]. 西安: 西安理工大学, 2009.

    QI Yunguo. Preparation of SiCp/AI composites and its microstructures and mechanical properties [D]. Xi'an: Xi'an University of Technology, 2009.
    [11]
    崔葵馨, 常兴华, 李希鹏, 等. 高体积分数铝碳化硅复合材料研究进展 [J]. 材料导报,2012,26(S2):401-405. doi: 10.3969/j.issn.1005-023X.2012.z1.108

    CUI Kuixin, CHANG Xinghua, LI Xipeng, et al. Advances in research on high volume fraction aluminum silicon carbide composites [J]. Materials Reports,2012,26(S2):401-405. doi: 10.3969/j.issn.1005-023X.2012.z1.108
    [12]
    邹镕, 罗兵辉, 柏振海, 等. 6066Al/SiCp复合材料制备工艺与性能 [J]. 铝加工,2013(5):9-14. doi: 10.3969/j.issn.1005-4898.2013.05.02

    ZOU Rong, LUO Binghui, BAI Zhenhai, et al. Preparation and properties of 6066Al/SiCp composites [J]. Aluminium Fabrication,2013(5):9-14. doi: 10.3969/j.issn.1005-4898.2013.05.02
    [13]
    金鹏, 肖伯律, 王全兆, 等. 热压烧结温度对SiC颗粒增强铝基复合材料微观组织及力学性能的影响 [J]. 金属学报,2011,47(3):298-304.

    JIN Peng, XIAO Bolu, WANG Quanzhao, et al. Effect of hot pressing temperature on microstructure and mechanical properties of SiC particle reinforced aluminum matrix composites [J]. Acta Metallurgica Sinica,2011,47(3):298-304.
    [14]
    原国森, 李明科, 王振永, 等. 烧结温度对SiCp/6061Al复合材料组织和性能的影响 [J]. 热加工工艺,2017,46(12):123-125.

    YUN Guosen, LI Mingke, WANG Zhenyong, et al. Effect of sintering temperature on mechanical properties and microstructure of SiCp/6061Al composite [J]. Hot Working Technology,2017,46(12):123-125.
    [15]
    王海龙, 张锐, 刘锁兵, 等. 烧结工艺对SiC/Cu–Al复合材料的力学性能及断裂行为的影响 [J]. 硅酸盐学报,2006(11):1315-1320. doi: 10.3321/j.issn:0454-5648.2006.11.005

    WANG Hailong, ZHANG Rui, LIU Suobing, et al. Effects of sintering process on mechanical properties and fracture behavior of SiC/Cu-AI composites [J]. Journal of the Chinese Ceramic Society,2006(11):1315-1320. doi: 10.3321/j.issn:0454-5648.2006.11.005
    [16]
    王晓阳, 朱丽娟, 刘越. 粉末冶金法制备AlSiC电子封装材料及性能 [J]. 电子与封装,2007(5):9-11, 15. doi: 10.3969/j.issn.1681-1070.2007.05.003

    WANG Xiaoyang, ZHU Lijuan, LIU Yue. Properties of AlSiC electronic packaging composites fabricated by P/M Technology [J]. Electronics & Packaging,2007(5):9-11, 15. doi: 10.3969/j.issn.1681-1070.2007.05.003
    [17]
    刘兴丹, 阎峰云, 赵红娟, 等. 烧结温度对SiCp/Al复合材料组织与性能的影响 [J]. 粉末冶金材料科学与工程,2017,22(1):20-25. doi: 10.3969/j.issn.1673-0224.2017.01.004

    LIU Xingdan, YAN Fengyun, ZHAO Hongjuan, et al. Effect of sintering temperature on microstructure and properties of SiCpAl composites [J]. Materials Science and Engineering of Powder Metallurgy,2017,22(1):20-25. doi: 10.3969/j.issn.1673-0224.2017.01.004
    [18]
    MAO X, HONG Y, WANG B, et al. Fabrication, microstructures and properties of 50vol.% SiCp/6061Al composites via a pressureless sintering technique [J]. Powder Metallurgy,2017:1-9.
    [19]
    王武杰, 洪雨, 吴玉程. SiC粒径比及体积比对SiCp/Al-5Si-2.5Mg复合材料组织及性能影响 [J]. 材料热处理学报,2018,39(7):7-14. doi: 10.13289/j.issn.1009-6264.2018-0121

    WANG Wujie, HONG Yu, WU Yucheng. Effect of SiC particle size ratio and volume fraction ratio on microstructure and properties of SiCp/Al-5Si-2.5Mg composites [J]. Transactions of Materials and Heat Treatment,2018,39(7):7-14. doi: 10.13289/j.issn.1009-6264.2018-0121
    [20]
    LEE H S, JEON K Y, KIM H Y, et al. Fabrication process and thermal properties of SiCp/Al metal matrix composites for electronic packaging applications [J]. Journal of Materials Science,2000,35(24):6231-6236. doi: 10.1023/A:1026749831726
    [21]
    钟鼓, 吴树森, 万里. 高SiCp或高Si含量电子封装材料研究进展 [J]. 材料导报,2008(2):13-17. doi: 10.3321/j.issn:1005-023X.2008.02.004

    ZHONG Gu, WU Shusen, WAN Li. Research development of electronic packaging materials with high SiCp or Si content [J]. Materials Reports,2008(2):13-17. doi: 10.3321/j.issn:1005-023X.2008.02.004
    [22]
    张全萍, 许伯藩, 吴新杰, 等. Mg对无压自浸渗制备SiCp/Al复合材料组织与性能的影响 [J]. 中国有色金属学报,2002(S1):147-150. doi: 10.3321/j.issn:1004-0609.2002.z1.032

    ZHANG Quanping, XU Bopan, WU Xinjie, et al. Effect of Mg on microstructure and properties of SiCp/ AI composite fabricated by pressureless infiltration [J]. The Chinese Journal of Nonferrous Metals,2002(S1):147-150. doi: 10.3321/j.issn:1004-0609.2002.z1.032
    [23]
    郭建, 沈宁福. SiC颗粒增强Al基复合材料中有害界面反应的控制 [J]. 材料科学与工程,2002(4):605-608, 600.

    GUO Jian, SHEN Ningfu. Control of detrimental interface reaction in SiCp/Al composite materials [J]. Materials Science and Engineering,2002(4):605-608, 600.
    [24]
    茅学志, 洪雨, 张玉君, 等. 粉末冶金制备50%SiCp/Al复合材料的结构及性能 [J]. 中国有色金属学报,2017,27(12):2493-2500.

    MAO Xuezhi, HONG Yu, ZHANG Yujun, et al. Microstructures and properties of 50%SiCp/Al composites fabricated by powder metallurgy [J]. The Chinese Journal of Nonferrous Metals,2017,27(12):2493-2500.
    [25]
    李少峰. 热压烧结制备碳化钛复合材料及其性能研究 [J]. 陶瓷学报,2022,43(1):100-106. doi: 10.13957/j.cnki.tcxb.2022.01.011

    LI Shaofeng. Preparation and properties of titanium carbide composites with hot pressing sintering [J]. Journal of Ceramics,2022,43(1):100-106. doi: 10.13957/j.cnki.tcxb.2022.01.011
    [26]
    LAKSHMIPATHY J, KULENDRAN B. Reciprocating wear behaviour of 7075Al/SiC and 6061Al/Al2O3 composites: A study of effect of reinforcement, stroke and load [J]. Tribology in Industry,2014,36(2):117-126.
    [27]
    LIU Y, DAN Y, BIAN Y, et al. The thermal conductivity of a composite material with nano-sized nonmetal particles embedded in a metal matrix [J]. Journal of Alloys and Compounds,2019,801:136-141. doi: 10.1016/j.jallcom.2019.06.126
    [28]
    刘猛. 电子封装用高导热颗粒增强金属基复合材料制备与研究 [D]. 长沙: 国防科学技术大学, 2017.

    LIU Meng. Preparation and study of particle reinforced metal matrix composites with high thermal conductivity for electric packaging [D]. Changsha: National University of Defense Technology, 2017.
    [29]
    WU J, ZHANG H, YANG Z, et al. Mechanical and thermal properties of carbon nanotube/aluminum composites consolidated by spark plasma sintering [J]. Materials and Design,2012,41:344-348. doi: 10.1016/j.matdes.2012.05.014
    [30]
    SUN J, CHEN G, WANG B, et al. Fabrication, microstructures, and properties of 50 vol.% SiCp/6061Al composites via hot pressing [J]. Journal of Materials Engineering and Performance,2019,28(5):2697-2706.
    [31]
    黄思德. 碳化硅颗粒增强铝基复合材料的制备与性能研究 [D]. 合肥: 合肥工业大学, 2012.

    HUANG Side. Study on fabrication and properties of silicon carbide particle reinforced aluminum matrix composites [D]. Hefei: Hefei University of Technology, 2012.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(5)  / Tables(4)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (492) PDF downloads(94) Cited by()
    Proportional views
    Related
    Website Copyright © Zhengzhou Research Institute for Abrasives and Grinding Co., Ltd.  豫ICP备05008669号
    Address：No. 121, Wutong Street, Hitech Zone, Zhengzhou  Postal Code：450001
    Phone: 0371-67650914 67661785
    Email Alerts RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return