CN 41-1243/TG ISSN 1006-852X
CN
Advanced Search+
Volume 42 Issue 4
Aug.  2022
Turn off MathJax
Article Contents
Article Navigation >  Diamond & Abrasives Engineering  > 2022  >  42(4): 467-472
WANG Sen, DONG Hai, GU Yu, WANG Ming, WANG Jiawei. Research on grinding quality and removal mechanism of polycrystalline diamond tools[J]. Diamond & Abrasives Engineering, 2022, 42(4): 467-472. doi: 10.13394/j.cnki.jgszz.2021.3002
Citation: WANG Sen, DONG Hai, GU Yu, WANG Ming, WANG Jiawei. Research on grinding quality and removal mechanism of polycrystalline diamond tools[J]. Diamond & Abrasives Engineering, 2022, 42(4): 467-472. doi: 10.13394/j.cnki.jgszz.2021.3002
shu

Research on grinding quality and removal mechanism of polycrystalline diamond tools

doi: 10.13394/j.cnki.jgszz.2021.3002

  • School of Mechanical Engineering, Dalian University of Technology, Dalian 116086, Liaoning, China

More Information
  • Received Date: 2021-12-29
  • Accepted Date: 2022-02-14
  • Rev Recd Date: 2022-02-14
    • Available Online: 2023-02-07
    Abstract
  • Aiming at grinding quality of polycrystalline diamond (PCD) tools, the grinding experiment was carried out to optimize the process parameters with cutting edge radius, cutting edge defect and flank roughness as the indexes. The grinding removal mechanism of PCD was also studied. The results show that the worktable setting pressure has the most significant effect on cutting edge radius. The diamond grinding wheel has the most significant effect on cutting edge defect. The grinding wheel speed has the most significant effect on flank roughness. PCD tools with high grinding quality can be obtained by using 4/5 ceramic-based diamond grinding wheel, 1 000 r/min grinding wheel speed and 170 N worktable setting pressure. Under the experimental conditions, the main removal methods of PCD are sliding effect and micro cracking. Smaller cutting edge radius, cutting edge defect and smoother surface of PCD can be obtained by micro cracking under the 1 000 r/min grinding wheel speed and the 170 N worktable setting pressure.

     

    • FullText(HTML)
  • loading
    • References(14)
  • [1]
    关佳亮, 任勇, 赵显辉, 等. 聚晶金刚石复合片镜面加工工艺优化研究 [J]. 现代制造工程,2018(1):6-10.

    GUAN Jialiang, REN Yong, ZHAO Xianhui, et al. Research on mirror finishing optimization process of polycrystalline diamond compact [J]. Modern Manufacturing Engineering,2018(1):6-10.
    [2]
    何云, 杨泊莘, 高阳华, 等. 聚晶金刚石刀具的制造及应用 [J]. 工具技术,2018,52(11):53-58. doi: 10.3969/j.issn.1000-7008.2018.11.025

    HE Yun, YANG Boxin, GAO Yanghua, et al. Manufacture and application of PCD tool [J]. Tool Engineering,2018,52(11):53-58. doi: 10.3969/j.issn.1000-7008.2018.11.025
    [3]
    LI G, RAHIM M Z, PAN W, et al. The manufacturing and the application of polycrystalline diamond tools – A comprehensive review [J]. Journal of Manufacturing Processes,2020,56(5):400-416.
    [4]
    ENESCU I. Research in the field of polycrystalline diamond tools [J]. International Journal of Energy and Environment,2020,14(4):14-18.
    [5]
    邓福铭, 张黎燕, 邓雯丽, 等. 聚晶金刚石表面加工质量对比试验研究 [J]. 金刚石与磨料磨具工程,2019,39(5):33-38.

    DENG Fuming, ZHANG Liyan, DENG Wenli, et al. Comparative experimental study of machining quality of polycrystalline diamond [J]. Diamond & Abrasives Engineering,2019,39(5):33-38.
    [6]
    ZHANG Z Y, DENG Z P, LONG J, et al. The research of PCD tool sharpening process parameters based on uniform design [J]. International Conference on Logistics Engineering, Management and Computer Science,2014,14:623-627.
    [7]
    BERGS T, MÜLLER U, VITS F, et al. Grinding wheel wear and material removal mechanisms during grinding of polycrystalline diamond [J]. Procedia CIRP,2020,93:1520-1525. doi: 10.1016/j.procir.2020.03.083
    [8]
    贾乾忠. 聚晶金刚石刀具关键制作工艺及机理研究 [D]. 大连: 大连理工大学, 2015.

    JIA Qianzhong. Research on key manufacturing technology and mechanism of polycrystalline diamond cutting tool [D]. Dalian: Dalian University of Technology, 2015
    [9]
    师润平, 韩春钰. PCD刀具刃磨质量研究 [J]. 制造技术与机床,2017(8):87-91.

    SHI Runping, HAN Chunyu. Study on the grinding quality of PCD cutting tool [J]. Manufacturing Technology & Machine Tool,2017(8):87-91.
    [10]
    李超国. 微圆弧金刚石刀具质量的测量与评价技术 [D]. 哈尔滨: 哈尔滨工业大学, 2021.

    LI Chaoguo. Measurement and evaluation of micro diamond cutting tool [D]. Harbin: Harbin Institute of Technology, 2021.
    [11]
    李嫚, 贾乾忠, 张弘弢, 等. 基于表面微观形貌的聚晶金刚石脆性去除机理研究 [J]. 机械工程学报,2014,50(13):202-206. doi: 10.3901/JME.2014.13.202

    LI Man, JIA Qianzhong, ZHANG Hongtao, et al. Study on brittle removal mechanism of polycrystalline diamond based on surface micro-morphology [J]. Journal of Mechanical Engineering,2014,50(13):202-206. doi: 10.3901/JME.2014.13.202
    [12]
    贾乾忠, 李嫚, 张弘弢, 等. 聚晶金刚石复合片非脆性去除磨削机理研究 [J]. 大连理工大学学报,2015,55(3):281-285. doi: 10.7511/dllgxb201503008

    JIA Qianzhong, LI Man, ZHANG Hongtao, et al. Study on non brittle removal grinding mechanism of polycrystalline diamond composite [J]. Journal of Dalian University of Technology,2015,55(3):281-285. doi: 10.7511/dllgxb201503008
    [13]
    WALMSLEY J C, LANG A R. Characteristics of diamond regrowth in a synthetic diamond compact [J]. Journal of Materials Science,1988,23(5):1829-1834. doi: 10.1007/BF01115728
    [14]
    王适, 张弘弢. 聚晶金刚石热稳定性的研究 [J]. 哈尔滨工业大学学报,2005,37(3):408-411. doi: 10.3321/j.issn:0367-6234.2005.03.035

    WANG Shi, ZHANG Hongtao. Study on thermal stability of polycrystalline diamond compacts [J]. Journal of Harbin Institute of Technology,2005,37(3):408-411. doi: 10.3321/j.issn:0367-6234.2005.03.035
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(12)  / Tables(3)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (680) PDF downloads(62) Cited by()
    Proportional views
    Related
    Website Copyright © Zhengzhou Research Institute for Abrasives and Grinding Co., Ltd.  豫ICP备05008669号
    Address：No. 121, Wutong Street, Hitech Zone, Zhengzhou  Postal Code：450001
    Phone: 0371-67650914 67661785
    Email Alerts RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return