CN 41-1243/TG ISSN 1006-852X
CN
Advanced Search+
Volume 42 Issue 3
Jul.  2022
Turn off MathJax
Article Contents
Article Navigation >  Diamond & Abrasives Engineering  > 2022  >  42(3): 275-282
SHI Xingtai, GUO Lei, LIU Xiaohui, JIN Qichao, CHEN Zhenxian, LÜ Jingxiang, WANG Jiaqing. Study on machining performance of fixed-abrasive lap-grinding plate with random grid structure[J]. Diamond & Abrasives Engineering, 2022, 42(3): 275-282. doi: 10.13394/j.cnki.jgszz.2021.0210
Citation: SHI Xingtai, GUO Lei, LIU Xiaohui, JIN Qichao, CHEN Zhenxian, LÜ Jingxiang, WANG Jiaqing. Study on machining performance of fixed-abrasive lap-grinding plate with random grid structure[J]. Diamond & Abrasives Engineering, 2022, 42(3): 275-282. doi: 10.13394/j.cnki.jgszz.2021.0210
shu

Study on machining performance of fixed-abrasive lap-grinding plate with random grid structure

doi: 10.13394/j.cnki.jgszz.2021.0210
  • 1.

    Key Laboratory of Road Construction Technology and Equipment, Ministry of Education, Chang’an University, Xi’an 710064, China

  • 2.

    State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China

More Information
  • Received Date: 2021-12-03
  • Accepted Date: 2022-03-14
  • Rev Recd Date: 2022-03-11
    • Available Online: 2022-07-13
    Abstract
  • To meet the increasing requirements on material removal efficiency, surface quality, and subsurface damage in the ultra-precision grinding process, a textured-fixed abrasive plate (T-FAP) with random grid structure based on the Voronoi Diagram is proposed. The abrasive tool is fabricated by using UV-curable resin and micro-level alumina abrasive grains. The influence of time-varying texture characteristics of surface wear on the machining performance is studied via MATLAB image analysis and numerical simulation of the grinding trajectory. The lap-grinding experiment of the aluminum workpieces is carried out to analyze the material removal efficiency and workpiece surface roughness obtained from the T-FAP grinding process. The results show that the surface roughness of the workpiece processed with the T-FAP grinding is 0.84 μm, and that the material removal rate is 3.21 μm/min. Compared with the traditional fixed abrasive grinding tool, the T-FAP grinding ensures the material removal efficiency and obtains high surface accuracy as well.

     

    • FullText(HTML)
  • loading
    • References(11)
  • [1]
    TAWAKOLI T, AZARHOUSHANG B. Influence of ultrasonic vibrations on dry grinding of soft steel [J]. International Journal of Machine Tools & Manufacture: Design, Research and Application,2008,48(14):1585-1591.
    [2]
    HASHIMOTO F, SILVA E J, GUO C, et al. Industrial challenges in grinding [J]. CIRP Annals-Manufacturing Technology,2009,58(2):663-680. doi: 10.1016/j.cirp.2009.09.006
    [3]
    BRINKSMEIER E, MUTLUGUNES Y, KLOCKE F, et al. Ultra-precision grinding [J]. CIRP Annals-Manufacturing Technology,2010,59(2):652-671. doi: 10.1016/j.cirp.2010.05.001
    [4]
    TAWAKOLI T, AZARHOUSHANG B. Intermittent grinding of ceramic matrix composites (CMCs) utilizing a developed segmented wheel [J]. International Journal of Machine Tools & Manufacture,2011,51(2):112-119. doi: 10.1016/j.ijmachtools.2010.11.002
    [5]
    LEE K W, WONG P K, ZHANG J H. Study on the grinding of advanced ceramics with slotted diamond wheels [J]. Journal of Materials Processing Technology,2000,100(1):230-235.
    [6]
    杨张一. 开槽冰冻固结磨料抛光垫的抛光性能研究 [D]. 南京: 南京航空航天大学, 2013.

    YANG Zhangyi. Study on polishing performance of ice fixed abrasive polishing pad with grooves [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2013.
    [7]
    TSAI M Y, WANG S M, TSAI C C, et al. Investigation of increased removal rate during polishing of single-crystal silicon carbide [J]. International Journal of Advanced Manufacturing Technology,2015,80(9/10/11/12):1511-1520. doi: 10.1007/s00170-015-7023-4
    [8]
    FANG C F, ZHAO Z X, LU L Y, et al. Influence of fixed abrasive configuration on the polishing process of silicon wafers [J]. International Journal of Advanced Manufacturing Technology,2017,88(1/2/3/4):575-584. doi: 10.1007/s00170-016-8808-9
    [9]
    FANG C F, ZHAO Z X, HU Z W. Pattern optimization for phyllotactic fixed abrasive pads based on the trajectory method [J]. IEEE Transactions on Semiconductor Manufacturing,2017,30(1):78-85. doi: 10.1109/TSM.2016.2637058
    [10]
    FANG C F, YAN Z, HU Z W, et al. Pattern design of fixed abrasive pads inspired by the bee colony theory [J]. International Journal of Advanced Manufacturing Technology,2018,97(5/6/7/8):2563-2574. doi: 10.1007/s00170-018-2114-7
    [11]
    林魁. 固结磨料研磨抛光垫的性能评价及自修整机理的研究 [D]. 南京: 南京航空航天大学, 2010.

    LIN Kui. Performance evaluation and self-conditioning of fixed-abrasive pad [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2010.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(18)  / Tables(4)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (373) PDF downloads(43) Cited by()
    Proportional views
    Related
    Website Copyright © Zhengzhou Research Institute for Abrasives and Grinding Co., Ltd.  豫ICP备05008669号
    Address：No. 121, Wutong Street, Hitech Zone, Zhengzhou  Postal Code：450001
    Phone: 0371-67650914 67661785
    Email Alerts RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return