Effect of Co on performance and structure of low-temperature Fe-based ceramic/metal composite bonds

MA Jiajia; HOU Yonggai; LI Guangfeng; TIAN Jiugen; ZHOU Qinghai; GAO Yuan

doi:10.13394/j.cnki.jgszz.2016.1.0013

Volume 36 Issue 1

Feb. 2016

Turn off MathJax

Article Contents

Article Navigation > Diamond & Abrasives Engineering > 2016 > 36(1): 61-65

MA Jiajia, HOU Yonggai, LI Guangfeng, TIAN Jiugen, ZHOU Qinghai, GAO Yuan. Effect of Co on performance and structure of low-temperature Fe-based ceramic/metal composite bonds[J]. Diamond & Abrasives Engineering, 2016, 36(1): 61-65. doi: 10.13394/j.cnki.jgszz.2016.1.0013

Citation:

MA Jiajia, HOU Yonggai, LI Guangfeng, TIAN Jiugen, ZHOU Qinghai, GAO Yuan. Effect of Co on performance and structure of low-temperature Fe-based ceramic/metal composite bonds[J]. Diamond & Abrasives Engineering, 2016, 36(1): 61-65. doi: 10.13394/j.cnki.jgszz.2016.1.0013

Citation:

MA Jiajia, HOU Yonggai, LI Guangfeng, TIAN Jiugen, ZHOU Qinghai, GAO Yuan. Effect of Co on performance and structure of low-temperature Fe-based ceramic/metal composite bonds[J]. Diamond & Abrasives Engineering, 2016, 36(1): 61-65. doi: 10.13394/j.cnki.jgszz.2016.1.0013

PDF( 1244 KB)

Effect of Co on performance and structure of low-temperature Fe-based ceramic/metal composite bonds

doi: 10.13394/j.cnki.jgszz.2016.1.0013

School of Materials Science and Engineering, Henan University of Technology, Zhengzhou 450001, China

More Information

Rev Recd Date: 2015-12-20

Available Online: 2022-07-27

Abstract

Abstract

The effect of Co on performance and structure of low-temperature Fe-based ceramic/metal composite bonds was studied.Samples were sintered at 700℃in vacuum.Using mechanical tester,bending strength and impact strength of samples were tested and micro-topography analyzed using XRD and SEM.The results showed that when the addition of Co was 17wt%,it reacted with ceramic to form Co-CoO-ceramic cubic structure.The bending strength and impact strength of low-temperature ceramic/metal composite bonds reached their maximum,namely 130.55 MPa and 4.33 kJ/m²,respectively.The Fe-based prealloy powder with Co promoted finer bond crystalline,which reinforced the strength.
- ceramic/metal composite bonds,
- Co,
- fine crystalline reinforce,
- Fe-based prealloy powder