Research on precision grinding of ferrite with graphite grinding wheel

ZHANG Bei

doi:10.13394/j.cnki.jgszz.2016.1.0008

Volume 36 Issue 1

Feb. 2016

Turn off MathJax

Article Contents

Article Navigation > Diamond & Abrasives Engineering > 2016 > 36(1): 34-37,49

ZHANG Bei. Research on precision grinding of ferrite with graphite grinding wheel[J]. Diamond & Abrasives Engineering, 2016, 36(1): 34-37,49. doi: 10.13394/j.cnki.jgszz.2016.1.0008

Citation:

ZHANG Bei. Research on precision grinding of ferrite with graphite grinding wheel[J]. Diamond & Abrasives Engineering, 2016, 36(1): 34-37,49. doi: 10.13394/j.cnki.jgszz.2016.1.0008

ZHANG Bei. Research on precision grinding of ferrite with graphite grinding wheel[J]. Diamond & Abrasives Engineering, 2016, 36(1): 34-37,49. doi: 10.13394/j.cnki.jgszz.2016.1.0008

Citation:

ZHANG Bei. Research on precision grinding of ferrite with graphite grinding wheel[J]. Diamond & Abrasives Engineering, 2016, 36(1): 34-37,49. doi: 10.13394/j.cnki.jgszz.2016.1.0008

PDF( 1950 KB)

Research on precision grinding of ferrite with graphite grinding wheel

doi: 10.13394/j.cnki.jgszz.2016.1.0008

ZHANG Bei

Mechanical and Electronical Engineering Department, Henan University ofScience and Technology, Luoyang 471003, Henan, China

More Information

Rev Recd Date: 2015-12-12

Available Online: 2022-07-27

Abstract

Abstract

Graphite white corundum grinding wheel was proposed in this test,which could meet the precision machining requests and simplify the process.The experiment indicated that when the grinding parameters were 24m/s of grinding speed,1-10m/min of workpiece speed,2.5-7.5 μm of cutting depth,the surface roughness of ferrite parts were below R_a 0.18 μm,and the best roughness could reach R_a 0.09 μm.Surface appearance was mirror-like.Consequently the grinding process could entirely meet the high surface quality requirement of ferrite.
- ferrite,
- precision grinding,
- graphite grinding wheel,
- surface defect