旋转磁场下非球面工件的磁性混合流体抛光

田可; 郭会茹; 吴勇波; 陆政凯

doi:10.13394/j.cnki.jgszz.2021.0211

旋转磁场下非球面工件的磁性混合流体抛光

doi: 10.13394/j.cnki.jgszz.2021.0211

1.
武汉理工大学, 现代汽车零部件技术湖北省重点实验室, 武汉 430070
2.
南方科技大学机械与能源工程系, 广东深圳 518005

基金项目: 国家自然科学基金（51805394，61503290）。

详细信息

作者简介:
郭会茹，女，1985年生，讲师、硕士生导师。主要研究方向：磁场辅助超精密加工。E-mail：guohuiru85@163.com

中图分类号: TG58
计量
- 文章访问数: 439
- HTML全文浏览量: 180
- PDF下载量: 37
- 被引次数: 0
出版历程
- 收稿日期: 2021-12-23
- 修回日期: 2022-02-22
- 网络出版日期: 2023-02-07
- 刊出日期: 2022-08-10

Magnetic compound fluid polishing of aspheric workpiece under rotating magnetic field

1.
Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan 430070
2.
Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen 518005, Guangdong, China

摘要

摘要: 针对非球面光学元件的结构特点及其表面质量要求，在磁性混合流体抛光基础上，设计并制作以径向充磁永磁体为旋转磁场源的半球头抛光头。首先，通过Ansoft Maxwell磁场仿真，分析对比不同形状、不同尺寸磁体和偏心距下各磁体周围磁场的分布状况，选定直径为10.0 mm、高度为5.0 mm、偏心距为2.5 mm、径向充磁的圆柱形磁体。其次，通过观测并比较不同组成、配方和供应量的磁性混合流体在抛光头上的行为，确定磁性混合流体抛光液成分。最后，采用制备的磁性混合流体抛光液及自制的抛光头对非球面PMMA工件进行抛光试验。经过15 min抛光后，PMMA工件表面质量明显改善，其面型精度R_q由0.703 μm下降到2.433 nm，表面粗糙度R_a由0.545 μm下降到1.786 nm，说明研制的抛光头能实现非球面工件的纳米级抛光。
- 磁性混合流体 /
- 非球面抛光 /
- 磁场优化 /
- 抛光液行为
Abstract: According to the structural characteristics and the surface quality requirements of aspheric optical elements, a hemispherical head polishing head with radial magnetized permanent magnet as rotating magnetic field source is designed and manufactured on the basis of magnetic compound fluid (MCF) polishing. Firstly, through Ansoft Maxwell magnetic field simulation, the distributions of magnetic field around each magnet with different shapes, sizes and eccentricities are analyzed and compared, and the cylindrical magnet with diameter of 10.0 mm, height of 5.0 mm, eccentricity of 2.5 mm and radial magnetization is selected. Secondly, by observing and comparing the behaviors of MCF with different compositions, formula and supplies on the polishing head, the compositions of MCF polishing slurry is determined. Finally, the aspheric PMMA workpiece is polished with the prepared MCF polishing slurry and the self-made polishing head. After polishing for 15 min, the surface quality of the PMMA workpiece is significantly improved, its surface accuracy R_q is decreased from 0.703 μm to 2.433 nm, and the surface roughness R_a is reduced from 0.545 μm to 1.786 nm, indicating that the developed polishing head can realize the nano-polishing of aspheric workpiece.
- magnetic compound fluid (MCF) /
- aspheric polishing /
- magnetic field optimization /
- polishing slurry behavior

HTML全文

图 1 4种形状磁体下工件表面的磁场仿真

Figure 1. Magnetic field simulation of workpiece surface under four shapes of magnets

下载: 全尺寸图片幻灯片

图 2 抛光头与非球面干涉示意图

Figure 2. Schematic diagram of interference between polishing head and aspheric surface

下载: 全尺寸图片幻灯片

图 3 不同尺寸磁体下工件表面的磁场分布

Figure 3. Magnetic field distributions on workpiece surface under different sizes of magnet

下载: 全尺寸图片幻灯片

图 4 磁体旋转不同角度时的相对位置

Figure 4. Relative positions of magnets when rotating at different angles

下载: 全尺寸图片幻灯片

图 5 磁体旋转90°和270°时工件表面的磁力线分布

Figure 5. Distribution of magnetic lines of force on workpiece surface when magnet rotate 90° and 270°

下载: 全尺寸图片幻灯片

图 6 不同偏心距下铝外壳上的磁感应强度分布仿真结果

Figure 6. Simulation results of magnetic induction intensity distribution on aluminum shells under different eccentricities

下载: 全尺寸图片幻灯片

图 7 抛光头及抛光装置

Figure 7. Polishing head and polishing device

下载: 全尺寸图片幻灯片

图 8 MCF1和MCF2时的磁性簇分布情况

Figure 8. Distribution of magnetic clusters at MCF1 and MCF2

下载: 全尺寸图片幻灯片

图 9 磁体旋转前后不同MCF的分布情况

Figure 9. Distribution of different MCF before and after magnet rotation

下载: 全尺寸图片幻灯片

图 10 不同供应量的MCF2抛光液分布情况

Figure 10. Distribution of MCF2 polishing slurry with different supply

下载: 全尺寸图片幻灯片

图 11 抛光液形成的磁性簇区域示意图

Figure 11. Schematic diagram of magnetic cluster area formed by polishing slurry

下载: 全尺寸图片幻灯片

图 12 工件外观图

Figure 12. Workpiece appearances

下载: 全尺寸图片幻灯片

图 13 扫描电子显微镜观测的工件表面形貌

Figure 13. Surface morphology of workpiece observed by SEM

下载: 全尺寸图片幻灯片

图 14 Zygo观测的工件表面轮廓及形貌

Figure 14. Workpiece surface profile and morphology observed by Zygo

下载: 全尺寸图片幻灯片

表 1 钕铁硼磁体的性能参数

Table 1. Performance parameters of Nd−Fe−B magnet

参数	型号或取值
磁体型号	N35
剩余磁化强度 B_r / T	1.170 0～1.210 0
矫顽力 H_cb / (kA·m⁻¹)	≥868
最大磁能积 (BH)_max / (kJ·m⁻³)	263～287

下载: 导出CSV

表 2 4种磁体的尺寸

Table 2. Four magnet sizes

磁体形状	直径 D / mm	高度 H / mm	其他
轴向充磁圆柱体	10.0	5.0
径向充磁圆柱体	10.0	5.0
轴向充磁环形	10.0	5.0	内径为5.0 mm
轴向充磁半球头	10.0	5.0	轴向长为10.0 mm

下载: 导出CSV

表 3 MCF成分表（质量分数）

Table 3. MCF composition table（mass fraction）

编号	CIPs ω₁ / %	APs ω₂ / %	MF ω₃ / %	α−纤维素 ω₄ / %
MCF1	58	12	30	0
MCF2	58	12	27	3
MCF3	53	12	32	3
MCF4	48	12	37	3
MCF5	43	12	42	3

下载: 导出CSV

表 4 抛光工艺参数

Table 4. Polishing process parameters

参数	取值
磁体偏心距 e / mm	2.5
铝外壳转速 n_c / (r·min⁻¹)	500
磁体转速 n_m / (r·min⁻¹)	1 000
MCF供应量 V / mL	0.7
加工间隙 Δ / mm	1.0
抛光时间 t / min	15

下载: 导出CSV

参考文献(18)

[1]	张韬, 何建国, 黄文, 等. 机械轴与虚拟轴复合的磁流变抛光 [J]. 光学精密工程,2021,29(2):286-296. doi: 10.37188/OPE.20212902.0286 ZHANG Tao, HE Jianguo, HUANG Wen, et al. Magnetorheological finishing method that combines mechanical and virtual axes [J]. Optics and Precision Engineering,2021,29(2):286-296. doi: 10.37188/OPE.20212902.0286
[2]	周涛, 张云飞, 樊炜, 等. 磁流变抛光回转对称非球面工件精确自定位 [J]. 光学精密工程,2020,28(3):610-620. doi: 10.3788/OPE.20202803.0610 ZHOU Tao, ZHANG Yunfei, FAN Wei, et al. Precise localization of rotary symmetrical aspheric workpiece in magnetorheological polishing [J]. Optics and Precision Engineering,2020,28(3):610-620. doi: 10.3788/OPE.20202803.0610
[3]	龚峰, 李康森, 闫超. 玻璃精密模压成形的研究进展 [J]. 光学精密工程,2018,26(6):1380-1391. doi: 10.3788/OPE.20182606.1380 GONG Feng, LI Kangsen, YAN Chao. Progress on precision glass molding [J]. Optics and Precision Engineering,2018,26(6):1380-1391. doi: 10.3788/OPE.20182606.1380
[4]	高金辉, 薛常喜, 龚峰. 光学玻璃非球面元件模压过程仿真与实验 [J]. 机械设计与制造,2019(2):195-198, 203. doi: 10.3969/j.issn.1001-3997.2019.02.049 GAO Jinhui, XUE Changxi, GONG Feng. Simulation and experiment on molding process of optical glass aspheric components [J]. Machinery Design & Manufacture,2019(2):195-198, 203. doi: 10.3969/j.issn.1001-3997.2019.02.049
[5]	徐志强. 小口径非球面斜轴磁流变抛光关键技术研究 [D] . 长沙: 湖南大学, 2015. XU Zhiqiang. Study on key technology of inclined magnetorheological polishing for micro aspherical surface [D] . Changsha: Hunan University, 2015.
[6]	BEAUCAMP A, NAMBA Y, INASAKI I, et al. Finishing of optical moulds to λ/20 by automated corrective polishing [J]. CIRP Annals-Manufacturing Technology,2011,60(1):375-378. doi: 10.1016/j.cirp.2011.03.110
[7]	YAMAGATA Y, HIGUCHIT, HAMADA S, et al. Ultraprecision finishing of micro-aspheric surface by ultrasonic two-axis vibration assisted polishing [J]. CIRP Annals-Manufacturing Technology,2010,59(1):347-350. doi: 10.1016/j.cirp.2010.03.117
[8]	KORDONSKI W, SHOREY A. Magnetorheological (MR) jet finishing technology [J]. Journal of Intelligent Material Systems and Structures,2007,18(12):1127-1130. doi: 10.1177/1045389X07083139
[9]	王嘉琪, 肖强. 磁流变抛光技术的研究进展 [J]. 表面技术,2019,48(10):317-328. WANG Jiaqi, XIAO Qiang. Research progress of magnetorheological polishing technology [J]. Surface Technology,2019,48(10):317-328.
[10]	袁胜豪, 张云飞, 余家欣, 等. 磁流变抛光中表面彗尾状缺陷的生成与演变行为 [J]. 光学精密工程,2021,29(4):740-748. doi: 10.37188/OPE.2020.0499 YUAN Shenghao, ZHANG Yunfei, YU Jiaxin, et al. Formation and evolution behavior of comet-tail defects in magnetorheological finishing [J]. Optics and Precision Engineering,2021,29(4):740-748. doi: 10.37188/OPE.2020.0499
[11]	SHIMADA K, TOYOHISA F, OKA H, et al. Hydrodynamic and magnetized characteristics of MCF (magnetic compound fluid) [J]. Transactions of the Japan Society of Mechanical Engineers B,2001,67(664):3034-3040. doi: 10.1299/kikaib.67.3034
[12]	陈家学. 单晶SiC等离子体辅助集群磁流变抛光加工研究 [D] . 广州: 广东工业大学, 2021. CHEN Jiaxue. Research on plasma-assisted cluster magnetorheological finishing of single crystal SiC wafer [D]. Guangzhou: Guangdong University of Technology, 2021.
[13]	GUO H R, WU Y B. Ultrafine polishing of optical polymer with zirconia-coated carbonyl-iron-particle-based magnetic compound fluid slurry [J]. The International Journal of Advanced Manufacturing Technology 2016, 85: 253-261.
[14]	唐恒宁, 尹韶辉, 陈逢军, 等. 磁流变斜轴抛光及其路径控制 [J]. 制造技术与机床,2009(11):32-35. doi: 10.3969/j.issn.1005-2402.2009.11.012 TANG Hengning, YIN Shaohui, CHEN Fengjun, et al. Incined magnetorheological finishing and its path controlling [J]. Manufacturing Technology & Machine Tool,2009(11):32-35. doi: 10.3969/j.issn.1005-2402.2009.11.012
[15]	尹韶辉, 陈越, 王宇, 等. 磁流变抛光头形状对加工表面粗糙度的影响 [J]. 湖南大学学报(自然科学版),2010(1):45-48. YIN Shaohui, CHEN Yue, WANG Yu, et al. Influence of the shape of polishing tools on the surface roughness in magnetorheological finishing [J]. Journal of Hunan University (Natural Science Edition),2010(1):45-48.
[16]	FENG M, WU Y B, WANG Y L, et al. Investigation on the polishing of aspheric surfaces with a doughnut-shaped magnetic compound fluid (MCF) tool using an industrial robot [J]. Precision Engineering,2020,61:182-193. doi: 10.1016/j.precisioneng.2019.09.018
[17]	董国正. 小口径磁流变抛光装置设计与关键技术研究 [D] . 长沙: 国防科技大学, 2015. DONG Guozheng. Design of small-aperture magnetorheological finishing device and the key technology research [D] . Changsha: National University of Defense Technology, 2015.
[18]	FENG M, WU Y B, WANG Y L, et al. Effect of the components of magnetic compound fluid (MCF) slurry on polishing characteristics in aspheric-surface finishing with the doughnut-shaped MCF tool [J]. Precision Engineering,2020,65:216-229. doi: 10.1016/j.precisioneng.2020.04.021