Research on resin diamond wire made in China
-
摘要: 通过对比国内外钢丝样品的性能,优选出试验用国产钢丝。在此基础上,对钢丝表面处理所用的表面活性剂和酸进行了优选,最后使用优选的国产钢丝制成树脂金刚石线,并与国外钢丝基体的树脂金刚石线进行了对比。结果表明:国产3号钢丝成分、性能接近于进口钢丝;使用AEO-9表面活性剂和磷酸处理的钢丝表面效果较好;国产钢丝生产的树脂金刚石线性能达到进口钢丝生产的金刚线产品质量标准,完全可以满足使用要求。Abstract: By comparing the performance of steel wire samples made in China and abroad,a Chinese steel wire for experiment is selected.Based on this steel wire,surfactant and acid used in surface treatments are selected.Finally,resin diamond wires are produced with domestic and foreign steel wires respectively,the performance of which is compared.The results show that the components and performance of No.3Chinese steel wire are close to those of foreign steel wire.Surface treatment effect is better after treated using AEO-9and phosphoric acid.The resin diamond wire produced with domestic steel wire can satisfy the quality standard of foreign steel wire and meet application requirements.
-
Key words:
- resin diamond wire /
- steel wire /
- surface treatment
点击查看大图
计量
- 文章访问数: 147
- HTML全文浏览量: 38
- PDF下载量: 11
- 被引次数: 0