CN 41-1243/TG ISSN 1006-852X
Volume 42 Issue 5
Oct.  2022
Turn off MathJax
Article Contents
WANG Zhicheng, LI Wenhui, LI Xiuhong, ZHANG Yan, WEN Xuejie. Simulation analysis of particle mechanical behavior in rotary-assisted horizontal vibration polishing of blisk[J]. Diamond & Abrasives Engineering, 2022, 42(5): 617-625. doi: 10.13394/j.cnki.jgszz.2022.0051
Citation: WANG Zhicheng, LI Wenhui, LI Xiuhong, ZHANG Yan, WEN Xuejie. Simulation analysis of particle mechanical behavior in rotary-assisted horizontal vibration polishing of blisk[J]. Diamond & Abrasives Engineering, 2022, 42(5): 617-625. doi: 10.13394/j.cnki.jgszz.2022.0051

Simulation analysis of particle mechanical behavior in rotary-assisted horizontal vibration polishing of blisk

doi: 10.13394/j.cnki.jgszz.2022.0051
More Information
  • Received Date: 2022-03-15
  • Accepted Date: 2022-04-28
  • Rev Recd Date: 2022-04-18
  • Available Online: 2022-05-09
  • To solve the problems of low efficiency and poor uniformity in polishing blisk, a rotary-assisted horizontal vibration mass finishing process was adopted. Based on the discrete element method, the behavior of particles in the process was simulated to study the characteristics of the particle behavior on the blisk, and the variation law and the distribution of the particle acting force. The results show that the particles have different movement feature in the flow passage area and the non-work-piece area, and the particles on both sides, where there is no workpiece, can only act on the two sides of the blisk. During the rotating process of the blisk, the blade would experience some sudden forces when entering or exiting the particle flow field. The force on blade surface increases at first and then decreases along the rotating direction. Moreover, changing the rotating direction affects the fluctuation range of the forces acting on the back surface and the basin surface of blade. The effect of particle on the blade surface is obviously different, whose RSD value is between 30% and 60%, and the strong force of the back surface of blade mainly appears in the areas of inlet and tip while at the basin surface of blade is generally focused in the areas of exhaust and tip.

     

  • loading
  • [1]
    杨胜强, 李文辉, 李秀红, 等. 高性能零件滚磨光整加工研究进展 [J]. 表面技术,2019,48(10):13-24.

    YANG Shengqiang, LI Wenhui, LI Xiuhong, et al. Research development of mass finishing for high-performance parts [J]. Surface Technology,2019,48(10):13-24.
    [2]
    杨万辉, 朱静宇, 陈雷, 等. 整体叶盘疲劳失效分析与抗疲劳强化技术应用 [J]. 金属加工(冷加工),2019(9):43-46.

    YANG Wanhui, ZHU Jingyu, CHEN Lei, et al. Fatigue failure analysis of integral blisk and application of anti-fatigue strengthening technique [J]. Metal Working (Metal Cutting),2019(9):43-46.
    [3]
    黄春峰. 航空发动机整体叶盘结构及发展趋势 [J]. 现代零部件,2005(4):96-98, 100-101.

    HUANG Chunfeng. Structure and development trend of aero-engine blisk [J]. Modern Components,2005(4):96-98, 100-101.
    [4]
    黄云, 肖贵坚, 邹莱. 整体叶盘抛光技术的研究现状及发展趋势 [J]. 航空学报,2016,37(7):2045-2064.

    HUANG Yun, XIAO Guijian, ZOU Lai. Research status and development trend of blisk polishing technology [J]. Journal of Aeronautics,2016,37(7):2045-2064.
    [5]
    杨万辉, 徐新发, 杨金发. 整体叶盘先进制造技术应用与发展 [J]. 世界制造技术与装备市场,2019(2):69-72.

    YANG Wanhui, XU Xinfa, YANG Jinfa. Application and development of advanced manufacturing technology for integral blisk [J]. World Market for Manufacturing Technology and Equipment,2019(2):69-72.
    [6]
    肖贵坚. 整体叶盘型面开式砂带精密磨削方法及其实验研究 [D]. 重庆: 重庆大学, 2016.

    XIAO Guijian. Experimental research on the precision grinding method of blisk with open-loop abrasive belt [D]. Chongqing: Chongqing University, 2016.
    [7]
    WANG Y M, YANG J X, LI D W, et al. Tool path generation with global interference avoidance or the robotic polishing of blisks [J]. The International Journal of Advanced Manufacturing Technology, 2021, 117(3/4): 1223-1232.
    [8]
    FU Y Z, GAO H, WANG X P, et al. Blade surface uniformity of blisk finished by abrasive flow machining [J]. The International Journal of Advanced Manufacturing Technology,2016,84(5/8):1725-1735.
    [9]
    杨胜强, 李文辉, 陈红玲, 等. 表面光整加工理论与新技术 [M]. 北京: 国防工业出版社, 2011.

    YANG Shengqiang, LI Wenhui, CHEN Hongling, et al. Surface finishing theory and new technology [M]. Beijing: National Defense Industry Press, 2011.
    [10]
    徐泳, 孙其诚, 张凌, 等. 颗粒离散元法研究进展 [J]. 力学进展,2003,33(2):251-260. doi: 10.3321/j.issn:1000-0992.2003.02.010

    XU Yong, SUN Qicheng, ZHANG Ling, et al. Advances in particle discrete element method [J]. Advances in Mechanics,2003,33(2):251-260. doi: 10.3321/j.issn:1000-0992.2003.02.010
    [11]
    HASHEMNIA K, POURANDI S. Study the effect of vibration frequency and amplitude on the quality of fluidization of a vibrated granular flow using discrete element method [J]. Powder Technology,2018,327:335-345. doi: 10.1016/j.powtec.2017.12.097
    [12]
    LI W H, ZHANG L, LI X H, et al. Theoretical and simulation analysis of abrasive particles in centrifugal barrel finishing: Kinematics mechanism and distribution characteristics [J]. Powder Technology,2017,318:518-527. doi: 10.1016/j.powtec.2017.06.033
    [13]
    HAO Y P, YANG S Q, LI X H, et al. Analysis of contact force characteristics of vibratory finishing within pipe-cavity [J]. Granular Matter, 2021, 23(2).
    [14]
    NAEINI S E, SPELT J K. Development of single-cell bulk circulation in granular media in a vibrating bed [J]. Powder Technology,2011,211(1):176-186. doi: 10.1016/j.powtec.2011.04.018
    [15]
    LI X H, LI W H, YANG S Q, et al. Study on polyurethane media for mass finishing process: Dynamic characteristics and performance [J]. International Journal of Mechanical Science,2018,138:250-261.
    [16]
    DA SILVA MACIEL L, SPELT J K. Influence of process parameters on average particle speeds in a vibratory finisher [J]. Granular Matter,2018,20(4):1-11.
    [17]
    DA SILVA MACIEL L, SPELT J K. Comparison of DEM predictions and measured wall-media contact forces and work in a vibratory finisher [J]. Powder Technology 2020, 366: 434–447.
    [18]
    郭鹏辉, 李文辉, 李秀红, 等. 一维振动式滚磨光整加工颗粒流场的离散元模拟分析 [J]. 机械科学与技术,2021,40(7):1037-1042.

    GUO Penghui, LI Wenhui, LI Xiuhong, et al. Discrete element simulation analysis of particle flow field in one-dimensional vibration rolling finishing process [J]. Mechanical Science and Technology for Aerospace Engineering,2021,40(7):1037-1042.
    [19]
    李鹏, 李文辉, 李秀红, 等. 航空发动机整体叶盘回转式滚磨光整加工数值模拟与分析 [J]. 机械科学与技术,2021,40(4):633-640.

    LI Peng, LI Wenhui, LI Xiuhong, et al. Numerical simulation and analysis of rotary-typed mass finishing for aeroengine blisk [J]. Mechanical Science and Technology for Aerospace Engineering,2021,40(4):633-640.
    [20]
    苏文飞. 整体叶盘大尺寸扭曲通道电解预加工试验研究 [D]. 南京: 南京航空航天大学, 2017.

    SU Wenfei. Experimental investigation of electrochemical machining for large size twisted blisk cascade passage [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2017.
    [21]
    张荔, 李文辉, 杨胜强. 滚磨光整加工中磨料颗粒堆积角的离散元参数标定 [J]. 中国科技论文,2016,11(16):1821-1825. doi: 10.3969/j.issn.2095-2783.2016.16.006

    ZHANG Li, LI Wenhui, YANG Shengqiang. Discrete element parameter calibration of abrasive particle stacking angle in barrel finishing [J]. Chinese Scientific Papers,2016,11(16):1821-1825. doi: 10.3969/j.issn.2095-2783.2016.16.006
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(15)  / Tables(2)

    Article Metrics

    Article views (389) PDF downloads(47) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return